Showing 1–12 of 111 results

Show sidebar

Thermaltake 16GB (8GBx2) DDR4 3200MHz RGB Liquid Cooling

19,275.00
Crafted For Excellence
  • Unprecedented two-way liquid cooling or heatsink convection heat dissipation options
  • 16.8M RGB color across 12 super-bright addressable LEDs for stunning RGB illumination
  • 10-layer PCB construction for enhanced overclocking performance and stability
  • TT RGB PLUS, TT AI Voice Control, Razer Chroma, and Amazon Alexa RGB sync compatible
  • 5V Motherboard RGB sync ready
  • Intel XMP 2.0 Ready
  • Limited Lifetime Warranty for RAM

Thermaltake A500 Aluminum (Space Gray)

19,399.00
Thermaltake A500 Aluminum Tempered Glass Edition Mid Tower Chassis
Thermaltake A500 Aluminum Tempered Glass Edition mid-tower chassis features a sleek aluminum front panel, two 4mm tempered glass panels, two pre-installed 120mm front fans and a 120mm rear fan for optimal system ventilation. It has a built-in power supply cover for clean and easy cable management and also supports up to a standard ATX motherboard. Accommodating the latest PC hardware including the most advanced graphic cards and air/liquid cooling solutions, the A500 Aluminum TG is designed for those who are looking for a chassis with outstanding thermal performance that is further complemented by a clean and simply designed case.

Thermaltake Commander C31 TG ARGB

7,272.00
Angular, Mesh Front Panel Expanded from the gaming spirit of the classic Commander MS-I chassis, the uniquely design full mesh panel optimized airflow. With its modern design and high performance, it is the best choice for both gamers and enthusiasts.
    • The image is for reference only.
    • Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Riser GPU Support Bracket Specially designed for dual GPU placement options, Commander C Series has the support for vertical graphic card layout with dual PCI-E slots design. Integrated riser GPU support bracket not only prevents the graphic card from sagging, but also helps to reduce the weight on the motherboard PCI-E slots.
    • The image is for reference only.
    • Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Built-in PSU Cover
Equipped with a PSU cover with a ventilated design to improve airflow and hide those unsightly cables.
    • The image is for reference only.
    • Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Seamless Tempered Glass Panel The tempered glass side panel of the Commander C31 is built to be more durable and scratch resistant than older acrylic panels.
    • The image is for reference only.
    • Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Superior Hardware Support
The Commander C31 has outstanding expandability with support for a tower CPU cooler with maximum height 180mm, a dual expansion slot VGA of up to 310mm in length with reservoir, and a power supply with length of up to 200mm.
    • The image is for reference only.
    • Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Excellent Cooling Capability Optimized for excellent cooling capability with two 200mm 5V ARGB front fans and one 120mm standard rear fan. The case is able to house up to two 200mm, two 140mm or three 120mm front fans, up to two 140mm fans on top to allow users build a complete high-end system.
    • The image is for reference only.
    • Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Handy I/O Ports
Dual 3.0 USB ports on top-front panel to grant direct access when needed. As well as an ARGB button for controlling 7 lighting modes of ARGB fans.
    • The image is for reference only.
    • Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.

Thermaltake Commander C32 TG ARGB

7,272.00
FEATURES
  • Two Built-in 200mm 5V ARGB Front Fans
  • Excellent Cooling Capability with 2-Way Radiator Mounting up to 360mm
  • Built-in ARGB Switch Board for Different Lighting Modes
  • Gaming Design, Mesh Front Panel
  • Riser GPU Support Bracket
  • Built-in Power Cover
  • 4mm Tempered Glass Side Panel
  • Superior Hardware Support
  • Supports both ARGB Color Synchronization with ASUS, MSI, GIGABYTE, and ASRock Motherboards, and a RGB color selection button via the I/O Port
  • I/O Port Supports Dual USB 3.0
Dual Built-in 200mm 5V ARGB Case Fans
Preinstalled with two 200mm 5V ARGB front fans featuring hydraulic bearing, 9 addressable LEDs and 16.8 million-color illumination to guarantee high airflow and custom system designs to show off your PC design skills. Wave Mode – [Mode 1] RGB wave flows across the entire fan. Color mode cannot be changed while on wave mode. Tt LCS Certified
Tt LCS Certified is a Thermaltake exclusive certification applied to only products that pass the design and hardcore enthusiasts standards that a true LCS chassis should be held to. The Tt LCS certification was created so that we at Thermaltake can designate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations to ensure you get the best performance from the best features and fitment.
    • The image is for reference only.
    • Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Sync with Motherboard RGB Software Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync and ASRock Polychrome. It supports motherboards that have a 5V addressable RGB header, allowing you to control the lights directly from the above-mentioned software without installing any extra lighting software or controllers. For more details, please visit ASUS, GIGABYTE, MSI and ASRock official websites. Angular, Mesh Front Panel Expanded from the gaming spirit of the classic Chaser MK-I chassis, the extraordinary design full mesh panel optimized airflow. With its modern design and high performance, it is the best choice for both gamers and enthusiasts.
    • The image is for reference only.
    • Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Riser GPU Support Bracket Specially designed for dual GPU placement options, Commander C Series has the support for vertical graphic card layout with dual PCI-E slots design. Integrated riser GPU support bracket not only prevents the graphic card from sagging, but also helps to reduce the weight on the motherboard PCI-E slots.
    • The image is for reference only.
    • Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Built-in PSU Cover
Equipped with a PSU cover with a ventilated design to improve airflow and hide those unsightly cables.
    • The image is for reference only.
    • Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Seamless Tempered Glass Panel The tempered glass side panel of the Commander C32 TG ARGB is built to be more durable and scratch resistant than older acrylic panels.
    • The image is for reference only.
    • Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Superior Hardware Support
The Commander C32 TG ARGB has outstanding expandability with support for a tower CPU cooler with maximum height 180mm, a dual expansion slot VGA of up to 310mm in length with reservoir, and a power supply with length of up to 200mm
    • The image is for reference only.
    • Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Excellent Cooling Capability Optimized for excellent cooling capability with two 200mm 5V ARGB front fans and one 120mm standard rear fan. The case is able to house up to two 200mm, two 140mm or three 120mm front fans, up to two 140mm fans on top to allow users build a complete high-end system.
    • The image is for reference only.
    • Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Handy I/O Ports
Dual 3.0 USB ports on top-front panel to grant direct access when needed. As well as an ARGB button for controlling 7 lighting modes of ARGB fans.
    • The image is for reference only.
    • Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.

Thermaltake Commander C33 TG ARGB

7,272.00
  • Two Built-in 200mm 5V ARGB Front Fans
  • Excellent Cooling Capability with 2-Way Radiator Mounting up to 360mm
  • Built-in ARGB Switch Board for Different Lighting Modes
  • Gaming Design, Mesh Front Panel
  • Riser GPU Support Bracket
  • Built-in Power Cover
  • 4mm Tempered Glass Side Panel
  • Superior Hardware Support
  • Supports both ARGB Color Synchronization with ASUS, MSI, GIGABYTE, and ASRock Motherboards, and a RGB color selection button via the I/O Port
  • I/O Port Supports Dual USB 3.0
Dual Built-in 200mm 5V ARGB Case Fans Preinstalled with two 200mm 5V ARGB front fans featuring hydraulic bearing, 9 addressable LEDs and 16.8 million-color illumination to guarantee high airflow and custom system designs to show off your PC design skills.
    • The image is for reference only.
    • Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
One Click, Switching The Mode The 5V ARGB fans can be controlled using a simple interface built into the I/O panel that cycles through 7 different lighting modes and a range of different color options. Wave Mode – [Mode 1] RGB wave flows across the entire fan. Color mode cannot be changed while on wave mode. Tt LCS Certified Tt LCS Certified is a Thermaltake exclusive certification applied to only products that pass the design and hardcore enthusiasts standards that a true LCS chassis should be held to. The Tt LCS certification was created so that we at Thermaltake can designate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations to ensure you get the best performance from the best features and fitment.
    • The image is for reference only.
    • Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Sync with Motherboard RGB Software Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync and ASRock Polychrome. It supports motherboards that have a 5V addressable RGB header, allowing you to control the lights directly from the above-mentioned software without installing any extra lighting software or controllers. For more details, please visit ASUS, GIGABYTE, MSI and ASRock official websites Angular, Mesh Front Panel Expanded from the gaming spirit of the classic Overseer RX-I chassis, the special design full mesh panel optimized airflow. With its modern design and high performance, it is the best choice for both gamers and enthusiasts.
    • The image is for reference only.
    • Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Riser GPU Support Bracket Specially designed for dual GPU placement options, Commander C Series has the support for vertical graphic card layout with dual PCI-E slots design. Integrated riser GPU support bracket not only prevents the graphic card from sagging, but also helps to reduce the weight on the motherboard PCI-E slots.
    • The image is for reference only.
    • Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Built-in PSU Cover Equipped with a PSU cover with a ventilated design to improve airflow and hide those unsightly cables.
    • The image is for reference only.
    • Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Seamless Tempered Glass Panel The tempered glass side panel of the Commander C33 TG ARGB is built to be more durable and scratch resistant than older acrylic panels.
    • The image is for reference only.
    • Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Superior Hardware Support The Commander C33 TG ARGB has outstanding expandability with support for a tower CPU cooler with maximum height 180mm, a dual expansion slot VGA of up to 310mm in length with reservoir, and a power supply with length of up to 200mm.
    • The image is for reference only.
    • Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Excellent Cooling Capability Optimized for excellent cooling capability with two 200mm 5V ARGB front fans and one 120mm standard rear fan. The case is able to house up to two 200mm, two 140mm or three 120mm front fans, up to two 140mm fans on top to allow users build a complete high-end system.
    • The image is for reference only.
    • Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Handy I/O Ports Dual 3.0 USB ports on top-front panel to grant direct access when needed. As well as an ARGB button for controlling 7 lighting modes of ARGB fans.
    • The image is for reference only.
    • Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.

Thermaltake Commander C34 TG ARGB

7,373.00
  • Two Built-in 200mm 5V ARGB Front Fans
  • Excellent Cooling Capability with 2-Way Radiator Mounting up to 360mm
  • Built-in ARGB Switch Board for Different Lighting Modes
  • Gaming Design, Mesh Front Panel
  • Riser GPU Support Bracket
  • Built-in Power Cover
  • 4mm Tempered Glass Side Panel
  • Superior Hardware Support
  • Supports both ARGB Color Synchronization with ASUS, MSI, GIGABYTE, and ASRock Motherboards, and a RGB color selection button via the I/O Port
  • I/O Port Supports Dual USB 3.0

Thermaltake Commander C35 TG ARGB

7,598.00
  • Two Built-in 200mm 5V ARGB Front Fans
  • Excellent Cooling Capability with 2-Way Radiator Mounting up to 360mm
  • Built-in ARGB Switch Board for Different Lighting Modes
  • Gaming Design, Mesh Front Panel
  • Riser GPU Support Bracket
  • Built-in Power Cover
  • 4mm Tempered Glass Side Panel
  • Superior Hardware Support
  • Supports both ARGB Color Synchronization with ASUS, MSI, GIGABYTE, and ASRock Motherboards, and a RGB color selection button via the I/O Port
  • I/O Port Supports Dual USB 3.0

Thermaltake Commander C36 TG ARGB

7,598.00
  • Two Built-in 200mm 5V ARGB Front Fans
  • Excellent Cooling Capability with 2-Way Radiator Mounting up to 360mm
  • Built-in ARGB Switch Board for Different Lighting Modes
  • Gaming Design, Mesh Front Panel
  • Riser GPU Support Bracket
  • Built-in Power Cover
  • 4mm Tempered Glass Side Panel
  • Superior Hardware Support
  • Supports both ARGB Color Synchronization with ASUS, MSI, GIGABYTE, and ASRock Motherboards, and a RGB color selection button via the I/O Port
  • I/O Port Supports Dual USB 3.0

Thermaltake CONTAC 16

1,416.00
Heat-pipe Direct Touch Technology With Excellent Performance, supports 100W Two Ф6mm Heat-pipes provide good contact with CPU and enhance heat transfer Premium thermal grease provides higher thermal conductivity between CPU and cooler Pre-installed One 92mm High Performance Fan Fan speed with 2400 RPM provides high airflow Enclosed two clips for 2nd fan installation to increase cooling performance Highly Compatibility For Most Sockets support: Intel socket LGA 1155/1156/775 AMD socket FM1/AM3+/AM3/AM2+/AM2 (supports processor under 100W)

Thermaltake CONTAC 9

1,375.00
Contac 9 CPU Cooler
Contac 9 CPU Cooler delivers excellent cooling and whisper-quiet performance. Features 0.4mm thick aluminum fins and 3 Direct Touch heatpipes for effective heat dissipation. The included 92mm PWM controlled fan comes with high airflow fan blades and long life hydraulic bearing to ensure an airflow-optimized and reliable operation. Supports all the latest Intel and AMD CPU socket.
High Airflow Fan Blade Design
The fan blades are engineered to achieve the optimal cooling performance and generate large volume of air passing through the heatsink at any angle.

THERMALTAKE CORE G21 TEMPERED GLASS

6,450.00
Thermaltake Core G21 Tempered Glass Edition Mid-Tower Chassis The Core G21 Tempered Glass Edition Mid-Tower Chassis features durable 4mm thick tempered glass windows, a built-in power supply cover for clean cable management, and its excellent expandability and ventilation for high-end gaming configurations. The Core G21 TG supports the latest PC hardware, including the most advanced graphic cards, and air/liquid cooling solutions. Build your ultimate dream rig with Thermaltake Core G21 TG Edition!

Thermaltake Core P3 ATX Tempered Glass

10,302.00
The new Core P3 Tempered Glass Edition Open Frame chassis comes with a 5mm thick tempered glass front panel to provide durability and a clear view of the inner components.